 | . |  |
| ATB network | |
|
|
| Pond Construction with ECOLAT and ECOPIC |
There is the pond finished for his principal, him, therefore
will remain more job to the level of the finishes of the surroundings and of
the interior planning as the plantations for example.
The experience was conclusive, the usage of the ECOLAT and
ECOPIC brings an incontestable help to the implementation of a pond, by
against the pegs in azobé were revealed more difficult to press and
relatively fragile.
Let's see what Serge and Keepcools think these products
|
|
Serge's remarks
|
In order to enlarge my present pond with the adjunct
of a second pond to the level of soil, we decided to use the ECOLAT
and ECOPIC as well as some traditional pegs in Azobé
After having undertaken the upgrading in wanted height
of the ECOPIC pegs and Azobés with the laser level, the test
is achieved with these two materials, one in polyethylene, the other in a wood
resisting.
We immediately notice the easiness of bets some to work it with the ECOPIC pegs, we meet some problems for the fixing on the pegs in Azobé, more difficult to screw by report to the pegs in polyethylene.
Conclusion: following this experience, these ECOLAT materials and ECOPIC
are idéals for the implementation of the upgrading of the pond.
The pegs in Azobé on the other hand, put us
some problems when we placed the ECOLAT over, since
some among them got damaged.
Of the materials to use absolutely for a good bets to work it: ECOLAT and ECOPIC.
Artgraphbegain for Aquatechnobel.
|
|
The remarks of Keepcool
|
The setting up of the ECOLAT is of a disconcerting easiness.
Everything is to really place the different pegs of sustains.
We used 2 types of pegs, those in azobé and those in ECOPIC plastic.
The pegs in plastic are very easy to press even in one hard and stony soil.
By counter the pegs in azobé are not simple at all to press in this type of soil.
Indeed, they tend to split themselves.
Once all pegs put to level around the pond, it remains the pose of the écolat.
The pose is very simple, the lath follows all bend the tightest even.
Very easy to screw in the ECOPIC pegs, less in the azobé that has trend, here also, to split themselves.
If one works cleanly, with a good level, when the tour of the pond is finished, one
should have that a difference of 1 or 2 millimeters between the beginning of the lath and the end.
In short, it is very easy-to-operate and very aesthetic for the finish of a pond.
Keepcool for Aquatechnobel.
|
|
A manner besides to simplify the implementation of one
pond, I hope that these few pages will have brought you the
precisions on this type of installation, to you to play, good construction, now
Me yours to thank the firm Verhaert
and Firestone
for their involvement to this project
|
|
|
| Visits | |
| Partenairs | |
|
.jp
|
|
.be
|
|
.be
|
|
.be
|
|
|
.be
|
|
|
.be
|
|
|
.nl
|
|
.nl
|
|
.nl
|
|
|
.uk
|
|
|
.uk
|
|
|
.de
|
|
|
.de
|
|
|
.de
|
|
|
.eu
|
|
|
.es
|
|
|
.se
|
|
|
.lu
|
|
|
.it
|
|
|
.us
|
|
|
.us
|
|
|
.us
|
|
|
.my
|
|
|
