 | . |  |
| ATB network | |
|
|
| Do-it-yourself : The multi-chambres filter made of wood 2 |
The most delicate was the construction of the V of bottom, I first cut straight ahead a lath of 122 X 10 cm without tilted fields.
Another option would have been to foresee a board of bottom making the full width and to come to fix the two boards of bias over (to see plans).
All boards are fixed with the help of a layer of Tec7 and screw.
Utilize a saw bell to make the three evacuations then in 50 mm to make a gab everything around to the ripper so that the pass partitions comes himself recessed in wood, since they are short enough, to make a groove on the other hand in order to be able to paste (PVC paste) the elbow of 50 mm on a length of one cm, to use some plugs to screw PVC low-down of 50 mm as pass partitions, the gab to been filled of Tec7 and the pass partitions pushed in, everything being covered with Tec7 external side.
|
|
|
| Visits | |
| Partenairs | |
|
.jp
|
|
.be
|
|
.be
|
|
.be
|
|
|
.be
|
|
|
.be
|
|
|
.nl
|
|
.nl
|
|
.nl
|
|
|
.uk
|
|
|
.uk
|
|
|
.de
|
|
|
.de
|
|
|
.de
|
|
|
.eu
|
|
|
.es
|
|
|
.se
|
|
|
.lu
|
|
|
.it
|
|
|
.us
|
|
|
.us
|
|
|
.us
|
|
|
.my
|
|
|
